PX-4496

Die beiden Speaker-Management-Systeme verfügen über einen 96 kHz Prozessor in Kombination mit hochwertigen 24 bit AD/DA Wandlern.
Beide Modelle überzeugen durch Wirtschaftlichkeit, ausgezeichnete Audio-Performance, exzellente Akustikwerte und geringstes Eigenrauschen.
Die Geräte vergügen auch über einen Noise Generator, All Pass Filter sowie Compressor und Output Peak Limiter, Crossover-Filter bis 48dB/Oct (Linkwitz-Riley) sowie Delay-Einstellmöglichkeiten bis 480ms zeichnen diese Controller besonders aus.

Spezifikationen:
Beschreibung: Speaker-Management-Matrix-System
Inputs (XLR-balanced): 4
Outputs (XLR-balanced): 4
THD+N: 0,001% at 1kHz 0dBu
S / N: > 110dBA
Frequenzgang: 20Hz – 20kHz; -0,5dBu at 20Hz und 20kHz
AD & DA Converters: 24bit – 96kHz
RS 485 / USB: ja
DSP Resolution: 24bit (data) x 24 bit (coeff.), 54bit accumulation registers, 96 bit precision on intermediate processing data
Parametric Equalization: 30 Filter per Input + 3 All Pass Filter; 7 Filter per Output
Input Gain: From -18dBu to +12dBu by 0,5dBu resolutions steps
Output Gain: From -18dBu to +12dB by 0,1dBu resolution steps
Filter Type: Bell, Shelving, HP/LP, All Pass, Band Pass, Notch filter
Filter Gain: From -15dBu up to +15dBu by 0,5dBu resolution steps
Center Frequency: Selectable with a 1 Hz resolution step from 20Hz up to 20kHz
Filter Q/BW: Bell Type: Q from 0,4 up to 128 in 100 steps; Shelv/HP/LP Type: Q from 0.1 up to 5.1 in 100 steps; BandPass/Notch
Type/All Pass: Q from 4 up to 104 in 100 steps
Crossover Section: HPF/LPF; Butterworth 6/12/18/24dB per octave; Bessel 12/24dB per octave; Linkwitz -Riley 12/24/36/48dB per octave
Noise Generator: 2 Internal Noise Generator (to input 1/2 and to input 3/4); White/Pink Noise; Level from -40dBu to 0dBu
Input Noise Gate: Threshold from -80dBu up to -50dBu; Attack time from 1ms up to 1000ms; Release time 10ms up to 1000ms
Input/Output RMS LImiter: Threshold from 20dBu up to -10dBu; Ratio 2:1 – 32:1; Knee: 0-100%; Make up from -12dB to +12dB; Attack time from 5ms up 200ms; Release time from 0,1 sec up to 3 sec
Output Peak Limiter: Threshold from 20dBu to -10dBu; Attack time from 1ms up to 900ms; 10,4us increment/decrement steps per output
Device Presets: 32 User Presets
Rückseite Inputs: 4 x XLR female connector; 1 x XLR female RS485
Rückseite Outputs: 4 x XLR male connector
sonstiges / Rückseite: 2 x Ground-lift toggle switch; IEC C13 16A connector; Power on/off switch
Gewicht: 3,5 kg
Abmessungen (B x H x T) mm: 483 x 44 x 229mm; 1U

483 x 44 x 229mm (B, H, T)